Vehicles
613 not categorized PORSCHE 993 MOTORCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.ADVWSWH3XL Perfect gear to show off your tuner of choice at a windy track day or race event. This German made, wind and water proof soft shell jacket is available in black or white. It includes grey color contrasts with the FVD logo stitched in red on the collar, left chest and right arm. There are plenty of pockets with waterproof zippers to safely store personal items and electronics.
$148.50
Make a selection FVD10699712 For 997 turbo. - specially designed for tuned and motorsport vehicles the racing & high performance division of csf build and engineer the most advanced, efficient, and reliable cooling systems in the world. Csf manufacturers radiators with high performance all-aluminum and direct-fit replacement for racecars. The only high performance manufacture to feature this advanced technology. These radiators are stamped to the same geometry of the application's original plastic end radiators. These tanks feature less welding, and are generally considered the strongest tank designs in the industry.
$548.90
Make a selection FVD11072197 Fits: GT3 r, 4l, 331kw (11-), GT3 cup 3.8l (10-), GT3 rs, 3.8l, 331kw (10-), GT3, 320kw (10-) General Fitment911 GT3 2007-11
$30.80
Make a selection FVD20798700 This FVD motorsports oil pump kit is a must for 987.1 Caymans and Boxsters driven on the track. Our kit includes a second return oil pump and our FVD motorsports oil pan. The issue: the 987.1 Boxster/Cayman from 2005 to 2008 has the factory return oil pump located on the right rear side. On the left side, the return oil pump located in front. So when driven fast in right turns, the oil from the camshaft case (rear left) does not flow back quickly enough into the oil pan. When the oil pan is starved of oil, the oil pump sucks in air and over time the motor will seize. The solution: our tandem return oil pump draws oil from the camshaft housing in (rear left, 3rd cylinder) and feeds it back into the oil pan so th...(choose a part on the right to read more)
$3,274.30
Make a selection FVD343100091MS FVD-alu-camberplates replace soft top strut rubber bushings. The FVD-camberplates are machined from billeted aluminum, providing you with a wide range of camber possibilities. FVD-alu-camberplates fits on original-shocks General Fitment911 2009-12911 2005-08 911 1998-05 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08 BOXSTER 1997-04
$561.75
Make a selection MAP09028016 The Porsche flat six boxer engine and the cars it powers are legendary. with this kit you can assemble a model of a 1966 2.0 litre flat six engine in around three hours. Discover the fascinating world of automotive engineering with the whole family
From $195.00
Make a selection FVD351930499 This adapter is needed to mount the big red caliper from the 965 or 993 turbo to a 930 3.0 l or 930 3.3 l. Complete with 10.9 grade m12x30x1.5 mm mounting bolts. Sold individually. 2 necessary per axle. Please note: aluminum corrodes in contact with salt and other environmental influences. For motorsport use only! General Fitment911 1970-73
From $202.12
Make a selection GR2020 Specially formulated to reduce oil consumption and leakage in high mileage cars. The molecular structure of motor oil saver prolongs engine life while reducing smoking caused by worn internal engine parts. As an added bonus, it rejuvenates gaskets and seals. This product should be added with each oil change for maximum benefit and protection. General FitmentACCESSORY
$8.00
Make a selection FVD50501800 When you are installing a lightweight bumper or bumper bar for racing use, you want to remove as much weight as possible. Don't forget to remove your heavy factory supports. These are a lightweight alternative and are made in Germany. Weighs: .13 kilograms (.3 lbs.) sold individually. 2 needed for the rear bumper. Measurements shown are in centimeters. General Fitment911 1994-98
From $141.90
Make a selection FVD505981SCH Motorsport quality grp (glass-reinforced plastic) front bumper, specifically produced for the early 911 style headlights up to 2001. This will fit all 986 Boxster models however. - produced by a German motorsport manufacturer. - provisions for turn signals are included. - lightweight - made of high strength, grp (glass-reinforced plastic) - includes a sheet of black race mesh for the radiator inlets. Please note: this is a motorsport part that takes time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must properly be fitted and completely prepared prior to paint. They require pre-fitment, filling, sanding, primer and paint...(choose a part on the right to read more)
$1,381.37
Make a selection FVD890928132 Only 06.86-12.86
$634.70
Make a selection I05 The word "cardboard" and "Porsche" should not be used in the same sentence, not to mention be used in the actual car. But they did, and now we have a solution. Rennline’s aluminum blower assembly cover is a direct replacement of that cardboard eyesore that the factory installed in your car. Constructed from anodized aluminum and utilizes the factory mounts. All stainless steel hardware required for installation is included. This part fits left hand drive (lhd) cars only. Silver. General Fitment930 1975-77911 1974-77 911 1978-83 911 1984-86 911 1987-89
$163.90
Make a selection I05B The word "cardboard" and "Porsche" should not be used in the same sentence, not to mention be used in the actual car. But they did, and now we have a solution. Rennline’s aluminum blower assembly cover is a direct replacement of that cardboard eyesore that the factory installed in your car. Constructed from anodized aluminum and utilizes the factory mounts. All stainless steel hardware required for installation is included. This part fits left hand drive (lhd) cars only. Black in color; silver shown. General Fitment930 1975-77911 1974-77 911 1978-83 911 1984-86 911 1987-89
$163.90
Make a selection FVD351911499 This adapter is needed to mount the big red caliper from the 965 or 993 turbo to a 1970-89 911. Complete with 10.9 grade m12 x 30 x 1.5 mm (din 912) galvanized mounting bolts and lock washers. Sold individually. 2 necessary per axle. Please note: aluminum corrodes in contact with salt and other environmental influences. For motorsport use only! General Fitment911 1970-73
From $186.48
Make a selection I07 The word "cardboard" and "Porsche" should not be used in the same sentence, not to mention be used in the actual car. But they did, and now we have a solution. Rennline’s aluminum blower assembly cover is a direct replacement of that cardboard eyesore that the factory installed in your car. Constructed from anodized aluminum and utilizes the factory mounts. All stainless steel hardware required for installation is included. This part fits left hand drive (lhd) cars only. Silver. General Fitment930 1975-77911 1974-77 911 1965-69 911 1970-73
$163.90
Make a selection
$70.71
Make a selection
$228.80
Make a selection WAP08000815 The children's cap features the 24-hour racing logo, a finish line flag, and world champion logos. Adjustable elastic toggle strap fits most children. 100% cotton.
$20.78
Make a selection WAP61100S15 The men's motorsport tee features beige and navy fabric with Porsche and racing logos on the front and a 24-four racing imprint on the back. 100% cotton. Sizes s-xxl.
$52.91
Make a selection WAP65200M15 The men's motorsport long-sleeved tee is heritage blue, features Porsche and racing number "30" logos on the front, and a 24-four racing imprint on the back. 100% cotton. Sizes s-xxl.
$64.90
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |